Continuing into 2009 are the Picasso Subwoofers. These aggressive new subs are engineered from the ground up. The new motors yield more power handling than the previous drivers and are specific per size. Past experience proves that one-size-fitsall motors for 10”-15” subs does not yield top performance. The drivers feature polypropylene cones and NBR rubber surrounds for durability. The PXW subwoofers are available in dual 4-ohm coils or dual 2-ohm coils for versatility.
FEATURES
- Dual 2 or Dual 4 Ohm KSV Kapton Voice Coils
- Polypropylene Injection Molded Cone
- NBR-Rubber Surround
- Nickel Plated 8 ga. Compression Wire Terminal
- Conex/Cotton Composite Spider
- Texture Coat Finish on Stamped Steel Basket
- Suspension Integrated Tinsel Leads
- Vented Back Plate
- Fs (hz): 33.53
- Qms: 7.265
- Vas (ft³): 1.355
- Cms (mm/n): 0.248
- Mms (g): 90.8
- Rms (kg/s): 2.632
- Xmax (mm): 11.10
- Xmech (mm): 16.65
- Dia (in²): 8.069
- Sd (in²): 52.00
- Vd (ft³): 0.019
- Qes: 0.970
- Re (Ohm): 7.2
- Z (Ohm): 8
- BL (Gauss): 11.92
- Pe (watts): 350
- Qts: 0.856
- NO: 0.144
- 1w/1m SPL (dB): 83.61
- 2.8v SPL (dB): 84.19
- VC Dia. (in): 2.0
- Impedance (Ohm): DVC 4
- M-vd (ft³): 0.100
Measurements (in)
- Overall Diameter: 10.5
- Overall Height: 6.375
- Mounting Depth: 5.75
- Cutout Diameter: 9.25
- Flange Width: 0.75
- Flange Height: 0.625
- Weight (lb): 8.5









Rezensionen
Es gibt noch keine Rezensionen.